They are there, we live with them, we get used to them, and then one day we can not go anymore. Our express solutions to refurbish everything.

If the wall cracks ...

We open the slot with a triangle (scraper) by widening a little. It is vacuumed and moistened with a brush inside and on the outer edges (so that the filling coating holds better). The knife is immediately re-coated, working perpendicularly to the crack. Allow to dry, sand lightly with fine-grit sandpaper. If necessary, pass a smoothing coating. The right products: up to 1 cm deep, the Magic'Fissures Express, for deeper, aerosol, Magic'Rebouch, 13 € the 200 ml, Touprêt, in DIY stores.

And this scratch on the floor ...

If the scratch on the floor is superficial, it is colored with a touch-up pen in the color of the parquet, leroymerlin.fr. Less than 1cm deep, just put wood paste on a spatula slightly wider than the crack and apply it smoothing on the scratch or the hole. The bobo is deeper, it is necessary to push the string of hemp in the crack by packing it well with a spatula. And then recover with the wood pulp. Remove any surplus immediately. Let dry. Sand lightly with fine-grained sandpaper.

The sink took a hit

A burst on the enamel? Very simple and fast to use in its new version in syringe, this solvent-free product mixes an epoxy resin and a hardener, which will withstand water and detergents . Just apply the right amount of product to the shine after cleaning and lightly. Note: if your enamel has a little "yellowed" the product is very white and shiny! To mitigate the difference we can sand to mattify it. Atmosamail, 12,50 €, in supermarkets DIY.